263-02-002 | OnSite FMS+ Monitor Only

OnSite FMS+ 7″ touchscreen monitor

The big 7″ touchscreen display is the real brains of the OnSite FMS+ system. It takes the flow meter readings compiled by the OnSite Modules and converts the data to an easy-to-understand bar graph that gives you real-time monitoring of how each row is performing. You will see at a glance how each row is performing and see trends (otherwise known as blockages) as they develop.

Set your target application rates in the OnSite software and it will give you a reference line right on the display so you can see exactly how accurately each row is performing. If OnSite detects any row falling out of the acceptable range, it will change the color of the row and give you an alert. (Alerts can also be silenced.)

If you are running section control, just map the sections to your rows using the easy-to-use section wizard in the software. OnSite Smart Sense will automatically detect when sections are shut off and not trigger alerts.

Software Setup is easy. OnSite Smart Sense will automatically connect to all the OnSite Modules on the planter and put them in the right order. Configuration is largely automated. Just make a few quick choices to tell the software how you want to run. Most OnSiteFMS+ systems can be configured and ready to plant in under 15 minutes.

Powered by Android.
OnSite FMS+ software already installed

Includes:
7″ touchscreen display
USB Power Cable
USB Update Cable
User manual

Note: Power is usually provided by cradle, so no power cable should be necessary. However, the monitor can be charged via the mini USB port. CRADLE SOLD SEPARATELY (part # 263-02-003)