217-02-005 | OnSite 7″ Display Kit for Hard-Wired Systems

This kit supplies the brains of your OnSite FMS+ System. This Wired Display Kit works with both FlowBoard and Wet Boom systems. Just add FlowBoards with Module-to-Module cables or a wet boom harness with your flowmeters for a custom OnSite FMS+ system! This kit is designed to give you all the other required parts and pieces to make your customized OnSite FMS+ system work.

NOTE: THIS KIT DOES NOT INCLUDE THE REQUIRED HITCH-TO-MODULE HARNESS.
We make them in a variety of lengths from 15′ to 65′, so pick the best one for your installation when you order.
35′ Hitch-to-Module Harness: 215-02-035
50′ Hitch-to-Module Harness: 215-02-051

The big 7″ touchscreen display is the real brains of the OnSite FMS+ system. It takes the flow meter readings compiled by the OnSite Modules and converts the data to an easy-to-understand bar graph that gives you real-time monitoring of how each row is performing. You will see at a glance how each row is performing and see trends (otherwise known as blockages) as they develop.

Set your target application rates in the OnSite software and it will give you a reference line right on the display so you can see exactly how accurately each row is performing. If OnSite detects any row falling out of the acceptable range, it will change the color of the row and give you an alert. (Alerts can also be silenced.)

If you are running section control, just map the sections to your rows using the easy-to-use section wizard in the software. OnSite Smart Sense will automatically detect when sections are shut off and not trigger alerts.

Software Setup is easy. OnSite Smart Sense will automatically connect to all the OnSite Modules on the planter and put them in the right order. Configuration is largely automated. Just make a few quick choices to tell the software how you want to run. Most OnSiteFMS+ systems can be configured and ready to plant in under 15 minutes.

The OnSite Harness Terminator
The OnSite Terminator tells the system that there are no more modules to connect to. The first OnSite Module connects to the Module Power Cable and the last OnSite Module gets the terminator on the end. Everything in the middle connects with Module-to-Module cables. The whole system is wired in a simple daisy chain configuration, leaving little possibility of hooking anything up wrong.

The terminator comes with a jumper plug already installed. If you would like to use a lift switch, unplug the jumper and plug the lift switch into that port. BENCO has push button lift switch kits available with brackets designed to fit almost any planter on the market.

Includes:
7″ OnSite FMS+ Monitor (263-02-002)
Mounting Cradle for Monitor (263-02-003)
RAM Mount for Cradle (RAP-B-102U)
OnSite FMS+ Harness Terminator (263-02-006)
20′ Cradle-to-Hitch Harness (215-02-016)