102 200PH5EW – 2″ Wet Seal Pump With 5.5 HP Honda® Engine + Electric Start

Banjo 200PH-5EW Wet Seal Pump with Honda 5.5HP engine with electric start

Powered by the dependable Honda GX160 electric start gasoline engine, the Banjo 200PH5WE polypropylene wet seal centrifugal pump is a versatile and reliable pumping solution designed to meet your fluid transfer needs with performance and convenience. With its 2-inch NPT suction and discharge ports, the 200PH5W is engineered for efficient liquid transfer, ensuring that it can handle substantial volumes of fluid with ease. Whether you’re moving water, chemicals, or other liquids, this pump’s 2-inch ports provide ample capacity to get the job done efficiently. The use of polypropylene materials makes it lightweight and easy to transport, allowing you to take it wherever you need it.

The double seal contained in an ethylene glycol reservoir enhances the reliability of this pump. The carbon ceramic seal faces, coupled with a stainless steel cup and spring, and EPDM rubber components, ensure that the pump can handle a variety of liquids while providing a long-lasting and durable seal. This configuration minimizes the risk of leaks and prolongs the pump’s operational lifespan. Large weep holes positioned between the pump and engine enhance its maintenance and serviceability.

The pump housing, impeller, and seals are made with the most durable of materials in order to transfer not only water, but very corrosive type materials.  Honda and Banjo back this unit with a limited three year engine, and one year pump warranty.

• Run dry capability
• Double seal contained in ethylene glycol reservoir
• Carbon ceramic seal faces with stainless steel cup and spring with EPDM rubber
• Large weep holes between pump and engine
• V-shaped for quicker priming
• The pumps housing is made out of polypropylene to ensure it can safely transfer water, chemicals, and corrosive type materials
• Electric or Pull start
• OilGuard®: low oil sensor for low oil shutdown/alert
• Backed by a strong three year engine warranty
• Two inch water inlet and outlet
• Priming is enhanced by the pumps v-shaped body
• Impeller is made out of nylon for added strength
• Can pump up to11,700 gallons of liquid in one hour
• Mechanical seal is made out of EPDM rubber to endure extreme temperatures
• Drive shaft is equipped with a heavy-duty slinger seal
• Corrosion resistant.
• EPDM Standard, FKM available.
• Heavy duty flywheel.
• High oil fill
• Lightweight.
• Low maintenance.
• Call BENCO Products for pump replacement parts.

SPECS:

• Engine Size: 160 cc
• HP: 5-1/2 hp
• Tank Capacity: 0.82 gal
• Ignition Type: Recoil-Start
• Pump Mechanism: Centrifugal
• Body Material: Polypropylene
• Volute Material: Polypropylene
• Seal Material: EPDM
• Frame Material: Polypropylene
• Flow Rate @ 10 Ft. of Head: 200 gpm
• Flow Rate @ 20 Ft. of Head: 190 gpm
• Flow Rate @ 40 Ft. of Head: 160 gpm
• Flow Rate @ 60 Ft. of Head: 140 gpm
• Flow Rate @ 80 Ft. of Head: 115 gpm
• Max. Head: 120 ft
• Max. Suction Lift: 12 ft
• Maximum Self-Priming Lift: 12 ft
• Frame Design – Pumps: No Frame
• Impeller Design: Open
• Maximum Discharge Pressure: 55 psi
• Max. Liquid Temp.: 150 °F
• Inlet: 2 in FNPT
• Discharge: 2 in FNPT
• Overall Length: 19-1/4 in
• Overall Width: 14-1/2 in
• Overall Height: 13 in
• RPM: 3,600 RPM
• Engine Brand: Honda
• Agency Compliance: EPA
• Inlet Dia.: 2 in
• Inlet Standard: NPT